Tuesday, May 27, 2014

Reset Canon MP287 Error Code E08

When turned on the printer error  will  appear on the lcd panel of mp287  printer, the error code  e08  and if printing the  "the ink absorber is almost full" error message appears. Click here to download the canon resetter software.
Follow the guide to fix the printer error

Service mode:

  1. turn off canon mp287 error e08 that by pressing the power button. do not unplug the power cable
  2. press and hold the stop/reset followed by pressing the power button. so both buttons depressed position.
  3. off the button stop/reset while holding power button.
  4. press the stop/reset button as much as 6 times.
  5. then release both buttons at the same time, then perform the software mode

Software Mode

  1. Connect the USB Cable of the printer to the computer
  2. The computer  your computer will detect new hardware
  3. Run the service tool.
  4. select the main menu in the absorber & platen and then click set next to his right
  5. canon mp287 printer error e08 who will be back to normal

No comments: